Are you looking to install Clipsal Iconic Switches at your latest project? Then, you have come to the right place. Clipsal Iconic switches offer a modern range of electrical switches which are perfect for commercial and residential areas. The Clipsal Iconic switches feature many modern components and electrical accessories. The switches can be customized according to the needs of the client. The Clipsal Iconic switches include safety shutters and locking options that ensure that all electrical devices are safe from electrical hazards. 

Let’s take a look at how to correctly install the Clipsal Iconic switches while upholding safety regulations. 

Step-by-step Guide for Installing Clipsal Iconic Switches: 

Step 1: Gather All the Necessary Tools:  

All projects require proper tools and devices. So, before you start your project you need to have all your tools at hand. This helps save time and extra effort. You will need the following tools: 

• Clipsal Iconic 2 Gang Switch. 
• Screwdrivers. 
• Wire strippers. 
• Electrical tape. 
• Voltage tester. 
• Drill (if you need to drill new holes). 
• Wall plate 

Step 2: Turn Off All Power and Remove the Existing Switch:  

Always consider your safety first! Make sure that you switch off the all power on the property from the main circuit breaker. Then, to ensure no voltage is running through the wires you can test it by using a voltage tester. This is an important step if you are replacing an old switch. Start by unscrewing the cover plate. Now, detach the old switch from the electrical box. After the old switch has been properly removed make a note of the wirings. You can take a picture to help with the new switch installation. 

Step 3: Prepare the Wiring:  

When you install a new switch, it is essential that you run new wiring. You can start by stripping of about 10-12 mm of installation from the wires with the help of wire strippers. Just make sure that the wires are clean and straight. This ensures that the wires don’t jumble or get tangled. Paying a close attention to this little detail helps save energy and avoid electrical issues. 

Step 4: Install the Switch Mechanism:  

Different electrical and construction projects can require a wide range of switches. Therefore, you will need to change your installation process. 

• For Single-Gang Switches: When you are working with a single gang switch such as Clipsal Iconic 1 Gang Switch, you have to align it with the mounting holes in the electrical box. Once it is properly in place you can secure it with screws. 
• For Multi-Gang Switches: For multi-gang switches such as Clipsal Iconic 3 Gang Switch and Clipsal Iconic 4 Gang Switch the procedure is similar. After aligning the switches screw it with screws. You can get these switches at AGM Electrical Supplies.

Step 5: Connect the Wires and Attach the Cover Plate:  

After that you should connect the wires with the properly marked terminals such in the case of live wires, they have to attach it with the “L” terminal which stands for live on the switch. Same goes with the Neutral wire which is blue in color. If required you need to attach the Earth wire which is often in green or yellow color. Once you have attached all the proper wiring, use electrical tape to wrap any exposed wire to avoid energy loss or sparking. 

After you have double checked the wires and ensured that each wire is correctly in place it is time to attach the cover plate. 

Step 6: Test the Installation:  

The last step of the process is to ensure that the switch mechanism is properly installed and wired in. After securing the cover plate with the screws and ensure it is properly fixed with the wall for a neat finish. Now that everything is in place you can turn on the circuit breaker. You can check if the Clipsal Iconic switches are working properly by flipping them on and off to ensure that the wires are connected. 

If you have installed more than one switch then you should check all the switches once thoroughly. In the off chance, there is some issue such as sparking or the lights don’t turn on you should turn off the power and inspect the wires and circuit again. 

Step 7: Final Touches:  

If everything is in place and working, it is time to add the final touches. Make sure you have packed away your tools and cleared off all the clutter. If the switch or the cover plate has any smudges or marks on it, you should clean it off with a clean cloth. 

Get the Best Clipsal Iconic Switches at AGM Electrical Supplies!

Clipsal Iconic switches are one of the most in-demand switches, making them the top choice for contractors and electrical contractors. The innovative design of these switches makes upgrades and installation easy. The Clipsal Iconic switches, with their innovative sleek design, functionality and customization options are the top choices for many homeowners as well. If you are looking to buy Clipsal Iconic Switches from a wholesaler in Australia at great prices then AGM Electrical Supplies is the perfect choice for you. The store is currently having a sale on Clipsal Iconic switches. So, what are you waiting for? Order now!